Nail Polish Rack

I have seen loads of different DIY Nail Polish Rack tutorials and I have been complaining for ages about not having a good space for my nail polish. So I made my own rack today! I spent less than $7.

I bought 3 20x30 inch foam boards from the Dollar Tree for $1 each. Then I got a roll of Duct Tape from AC Moore on sale. I already had the ruler, slicer, pencil and hot glue gun with extra glue sticks. 

I took a full board and marked every 5 inches going short ways. And the second board I marked 7 lines at every 2 inches and then another 7 lines every 1 inch. Then I used my cutter and cut the 2 and 1 inch pieces. Then long ways I used the third board to mark 2 2.5 inch strips and cut them. 

I wraped each of my 1 inch strips in Duct Tape. 

I used my hot glue gun to glue my 2 inch strips on each of my 5 in marks on the full board and then I put one strip across the top and one on the bottom. 

Next, I glued the 2.5 inch strips to the sides. 

Last step is to glue the 1 inch Duct Tape covered strips to the front of the shelves to keep the polish from falling off. 

Here's my nail polish ready to go on the shelf!

All my nail polish fit but barely. I had to put some on top and kind of squeeze them into the shelves. So next week I'll probably build a second one. 

This has 124 bottles plus my top and base coats and cuticle remover and nail polish thinner. I would guess to keep them off the top it would probably be better to hold about 100-110 bottles.